Lap-belt Bung

Lap-belt Bung

what was that?

You want a bung to fill the hole of your lap belt boss, but it’s full of grot?

So the bung needs to tap the thread into the grot and clean it out?

it shouldn’t be ugly, maybe a nice carbon fibre weave appearance?

you don’t care if it’s billet aluminium and you don’t want it to cost £40?

Have I got good news for you!

The threads have cuts to clear out grot as you screw it in. screw it gently in a couple of times to clear the thread then just tweak it up and it should stay where it is. don’t overtighten it and it should stay where it is for years to come as the plastic is pretty solid. you can always loctite it if needed.

£13 delivered

To order, USE THIS FORM

Delivery:

Usually delivery is within a week, sometimes it is a little more, sometimes it’s next day. If you need it rushing, please get in touch. International delivery is usually about £15 to the US, Japan or Oz, around £9 to France, etc.

Colours:

I have many colours available in PLA. In PETG generally only black and grey. not all products are available in PLA as it is not stable under high temperature. if you have a special request, just ask as I may be able to help.

Surface Finish:

These are 3D printed parts and for some of them the finish of the outward facing side can be either carbon-fibre effect, triangles, textured or plain as seen here: Surface Finish I make it carbon by default. If you want something else, please let me know.

Contact:

to contact me, either email john@uberniche.co.uk or hit me up on Instagram